How To Reset Toyota Maintenance Light Highlander. Turn off the ignition switch and remove the key from the ignition. Turn the ignition to run (one position before starting engine).
For push button ignition models, press the button once. Continue holding the odometer button for 10. I need to reset that annoying little maintenance light.
Table of Contents
Oil Changes Are The Most Common Reason For The Maintenance Reminder To Illuminate.
Remove the cover plate located under. Press and hold odo/trip button and turn ignition to the “run” position. To reset the 2016 toyota highlander maintenance light after an oil change, please follow these instructions:
In This Section, I’ll Show You How To Reset The Maintenance Required Light On Toyota Highlander With The Trip Button.
The light should then flash, beep, and then go out. Press and hold the trip meter reset stalk and turn the ignition to the on position, without starting the vehicle. Hold knob for at least 5 seconds until “resetting maintenance data completed” is displayed.;
Press And Release The Trip Meter Reset Stalk Until The Odometer Display Shows Trip Meter A.
I need to reset that annoying little maintenance light. To reset the 2005 toyota highlander, please follow these instructions: Keep holding the odometer button for 10 seconds.
Ensure Trip Metre A Reading Is Shown.
From here, you'll want to press the odometer button until you get to trip a. If you have a toyota highlander with an automatic transmission, then you will need to follow this guide: Remove the cover plate located under the dash.
Turn Off The Ignition Switch And Remove The Key From The Ignition.
Turn the key on, do not start the engine. Keep holding the odometer button for 10 seconds. Turn the ignition to run (one position before starting engine).
Peak Property And Casualty Insurance Claims Phone Number Florida
Peak Property And Casualty Insurance Claims Phone Number Florida. If you need to make a [...]